ADC
The ADC interface is heavily utilized on the development kit and does not provide access to any of the channels for evaluation. Use of the ADC interface channels will require a custom carrier board for use with the phyCORE-i.MX8X SOM.
Note
VREF for ADC channels is 1.8V
ADC Channel |
Interface |
Part-Pin |
Description |
|---|---|---|---|
X_ADC_IN0 |
LVDS0 |
X49 - B40 |
Used for the PHYTEC Display Interface 0 |
X_ADC_IN1 |
LVDS1 |
X48 - B40 |
Used for the PHYTEC Display Interface 1 |
X_ADC_IN2 |
10/100/1000 Ethernet |
U56 - 44 |
Used as an interrupt/power down signal for the Ethernet interface |
X_ADC_IN3 |
Current Monitor |
U85 - 2 |
Used to monitor the output current of the SOM Supply |
X_ADC_IN4 |
10/100/1000 Ethernet |
U56 - 39 |
Used as a GPIO for LCD power control (1v8) |
X_ADC_IN5 |
10/100/1000 Ethernet |
U56 - 40 |
Used as a GPIO for LCD touch interrupt (1v8) |