ADC
====

The ADC interface is heavily utilized on the development kit and does not provide access to any of the channels for evaluation. Use of the ADC interface channels will require a custom carrier board for use with the phyCORE-i.MX8X SOM.

.. note:: VREF for ADC channels is 1.8V

.. list-table:: ADC
   :widths: 50 50 25 50
   :header-rows: 1

   * - ADC Channel
     - Interface
     - Part-Pin
     - Description
   * - X_ADC_IN0
     - LVDS0
     - X49 - B40
     - Used for the PHYTEC Display Interface 0
   * - X_ADC_IN1
     - LVDS1
     - X48 - B40
     - Used for the PHYTEC Display Interface 1
   * - X_ADC_IN2
     - 10/100/1000 Ethernet
     - U56 - 44
     - Used as an interrupt/power down signal for the Ethernet interface
   * - X_ADC_IN3
     - Current Monitor
     - U85 - 2
     - Used to monitor the output current of the SOM Supply
   * - X_ADC_IN4
     - 10/100/1000 Ethernet
     - U56 - 39
     - Used as a GPIO for LCD power control (1v8)
   * - X_ADC_IN5
     - 10/100/1000 Ethernet
     - U56 - 40
     - Used as a GPIO for LCD touch interrupt (1v8)