Booting Essentials
This section of the product wiki contains guides to update and boot from different boot sources on the phyCORE-i.MX8X SOM.
Boot Modes
The phyCORE-i.MX8X development kit supports booting from many different interfaces. By default, the developement kit is set to boot from the micro-SD card. To change the boot device, DIP switches S2, S5 and S10 can be used. Boot switches should be changed with power off.
ON |
OFF |
|---|---|
Enables S10 to override default boot sequence |
Disables S10. Allowing the SOM to boot with default boot sequence |
SD |
eMMC |
UART |
Flex SPI |
|---|---|---|---|
|
|
|
|