Power LEDs
There are five green LEDs on the phyCORE-AM65x Carrier Board which indicate the presence of power on the various supply rails available. These LEDs are not user programmable and are present for hardware debugging purposes only.
![phyCORE-AM65x Power LEDs](../_images/pcm-067-pwr-leds.png)
The table below lists the LEDs and information about their corresponding power rails.
Reference Designator |
Description |
---|---|
D10 |
VCC_5V0 Power Rail Indicator
|
D11 |
VCC_3V3 Power Rail Indicator
|
D12 |
VDD_3V3 Power Rail Indicator
|
D13 |
VDD_5V0 Power Rail Indicator
|
D14 |
VDD_12V0 Power Rail Indicator
|
Note
There is an additional 1.8V power supply rail that does not feature an indicator LED.
VDD_1V8 Power Rail
The Texas Instruments LP5912 DC-DC regulator (U9) powers the VDD_1V8 power supply rail from the VDD_3V3 power supply rail.
The VDD_1V8 power supply rail powers various accessory circuits on the Carrier Board.
The VDD_1V8 supply rail is available at the Expansion Connector.