eMMC
Flashing the eMMC is detailed in its dedicated chapter, referenced as Flashing the eMMC.
Booting from eMMC
The phyCORE-AM62Ax development kit is configured to boot from an SD Card slot by default. This guide will serve to provide basic steps for booting from the SOM’s onboard eMMC flash memory after it has been flashed.
Boot Switch Settings
S7 should be ON
![eMMC Boot Switch](../_images/pb-07124_boot-emmc.png)
![phyBOARD-AM62Ax boot switches](../_images/pb-07524_bootswitch.png)
Note
Be mindful of the switch orientation!