Building an Application

We will use the phyboard-lyra-am62ax from the MCU+ SDK as an example for how to build an application for a co-processor.

First make sure you have followed the instructions in MCU+ SDK Host Setup.

  • Import the phyboard-lyra-am62ax R5F Blink example into the Project Explorer.

    Note

    On the left of this screen is the “Project Explorer” window in CCS. If you do not see it, try enabling it in the “View” tab.

    The location of the "Project Explorer"

  • Navigate to Project -> Import CCS Project

    Import a CCS Project

  • In the “Import CCS Projects” popup, choose “Select search-directory” and navigate to ~/ti/mcu_plus_sdk/examples/drivers/gpio/gpio_led_blink/phyboard-lyra-am62ax/mcu-r5fss0-0_nortos/. The gpio_led_blink example program should appear as a discovered project. Select it, then press finish.

    Select the correct CCS project

This project contains changes to allow the led blink example to run on a phyCORE-AM62Ax SOM alongside Linux. The linker.cmd file has changes to allow for IPC between Linux and the R5 core, and the example.syscfg file also has changes to enable IPC and select the correct gpio pin for the LED on the SOM. You can compare the phyboard-lyra-am62ax files with the corresponding am62ax-sk files to see exactly what changes were made.

  • To build the project, right click the project name in the Project Explorer and select “Build Project”.

    Build a CCS project

  • The binary can now be found in “Debug/gpio_led_blink_phyboard-lyra-am62ax_mcu-r5fss0-0_nortos_ti-arm-clang.out”