Booting Essentials

This section of the product wiki contains guides to update and boot from different boot sources on the phyCORE-AM62Ax SOM.

• SD Card
• eMMC
• UART
• OSPI
• USB/DFU
• Network
• Copying Files to the Device
• Configuring the Bootloader

Boot Modes

The phyCORE-AM62Ax development kit supports booting from many different interfaces. By default, the developement kit is set to boot from the micro-SD card. To change the boot device, DIP switches S5 and S6 can be used. Boot switches should be changed with power off.

Boot Settings (S7)

ON	OFF
Enables the DIP switches (S5, S6) to override default boot sequence	Disables the DIP switches (S5, S6). Allowing the SOM to boot with default boot sequence

Boot Settings

SD	eMMC	UART	OSPI	USB/DFU	Network	JTAG (No Boot)