.. include:: ../substitutions.rst
.. include:: stdout.rst

Display
=======

The i.MX RT1170 processor includes a MIPI DSI-2 display interface, supported and validated with the RK055HDMIPI4MA0 panel. This display shield is enabled by default when building the |release-name| example firmware via the ``-DSHIELD=rk055hdmipi4ma0`` west build argument, as described in the |ref-build-fw| guide.


.. image:: ../../images/phycore-rt1170/interfaceguides/phyBOARD_with_RK055HDMIPI4MA0.webp
   :width: 600px

For detailed hardware-level information, refer to the *8.2 MIPI-DSI* chapter in the |hw-manual-link|.

Requirements
------------

* RK055HDMIPI4MA0 5.5 inch 720 x 1280 TFT LCD display with touch sensitive overlay

   * `RK055HDMIPI4MA0 <https://www.nxp.com/part/RK055HDMIPI4MA0>`_

Usage
-----

Connect the RK055HDMIPI4MA0 display panel to connector X3 on the |product-cb| carrier board to test it. Once flashed with firmware built using the ``-DSHIELD=rk055hdmipi4ma0`` argument, the panel will initialize automatically at boot.

.. include:: ../../common/support-disclaimer-us.rst