Pre-Built Binaries
Note
The pre-built binaries available for download on this page reflect the default phyCORE-i.MX7 Development Kit configuration: KPB-01910-004
For a complete view of all available pre-built images please visit PHYTEC’s download server:
For an overview of all SOM/Development Kit configurations supported in this Release, checkout the BSP-Yocto-NXP-i.MX7-PD23.1.2.
Download Link for the Complete, Prebuilt SD Card Image
Download the SD Card Image - phytec-qt6demo-image-phyboard-zeta-imx7d-1.wic.xz
You’ll need the .wic.bmap file to flash SD Cards using the bmaptool utility.
Note
The files below are already contained within the SD Card Image. When the SD Card image is flashed to a disk; the first partition is a boot partition containing the U-Boot Bootloader and Linux kernel binaries, and the second is the root partition containing everything else.
Download Link for the Complete, Prebuilt SD Card Image
Download the Bootloader - u-boot-with-spl.imx
Download the Linux Kernel Image - zImage
Download the Default Linux Device Tree - imx7d-phyboard-zeta-kit.dtb
Download the Root Filesystem - phytec-qt6demo-image-phyboard-zeta-imx7d-1.tar.xz
Note
The kernel (Image), device tree blob (dtb), and device tree overlays below are included in the Root Filesystem (/boot directory of the root partition) by default.
Note
For any technical questions, feel free to reach out to PHYTEC’s Support Portal!