.. include:: ../substitutions.rst

.. |image-quickstart-bootup| image:: ../../images/phycore-am64x/pb-07225_quickstart_bootup.webp
    :width: 800px
    :alt: phyBOARD-Electra

.. |image-boot-sd| image:: ../../images/phycore-am64x/pb-07225_boot-sd.webp
    :width: 350px
    :alt: SD Card Boot Switch

.. |image-bootswitch-closeup| image:: ../../images/phycore-am64x/pb-07225-bootswitch-closeup.webp
    :width: 400px
    :alt: phyBOARD-AM64 Close-up of Boot Switches

.. |image-quickstart-devicemanager| image:: ../../images/phycore-am64x/pb-07225_quickstart-devicemanager.webp
    :width: 500px
    :alt: Windows Device Manager

.. _Quickstart-64:

Quickstart
==========

.. include:: ../../common/quickstart/quickstart-intro.rst

..
    Basic Evaluation Requirements
.. include:: ../../common/quickstart/quickstart-basic-eval.rst

..
    Check the Board Configuration
.. include:: ../../common/quickstart/quickstart-board-check.rst

* Check that the Boot Switch S10 is set to ON. S10 allows the Boot Switch Banks S3 and S4 to override the SOM's default bootstrap settings.

* Check that the Boot Switch Banks S3 and S4 are set to boot the |product| Development Kit from the SD Card:

..
    SD Boot Settings
.. include:: ../../common/quickstart/quickstart-sd-boot.rst

.. note::
    Board orientation is rotated for ease of viewing the Boot Switches.

Serial Communication Setup
--------------------------

* Using the provided micro-USB Serial Cable, connect the X20 Serial Debug Port of the |product| Development Kit to an available USB port on your Host Machine.

..
    Windows 10 Instructions
.. include:: ../../common/quickstart/quickstart-windows.rst

* You should see two COM Ports provided by the |product| Development Kit's CP2105 USB to UART Bridge; one should be designated as "Enhanced" and the other "Standard". **You will need the COM Port Number for the "Enhanced" port in the following steps in order to establish serial communication with Linux running on the target hardware.**

  * The |product| Development Kit configures two COM Ports; one for Linux running in the MAIN domain (Cortex-A53 compute cluster) of the AM6442 processor, and the other for the MCU domain (reserved for the real-time co-processors).

..
    TeraTerm Instructions (continued from Windows 10 Instructions)
.. include:: ../../common/quickstart/quickstart-tera-term.rst

..
.. note:: If you're using a Windows 11 host and having trouble connecting or seeing output in the terminal, you might need to install the Silicon Labs driver. Download the `driver here <https://www.silabs.com/developer-tools/usb-to-uart-bridge-vcp-drivers>`_, then update the COM port driver in Device Manager by right-clicking the COM port, selecting "Update driver," and pointing to the extracted driver folder. You may need to restart your machine after updating the driver.

..
    Linux Instructions
.. include:: ../../common/quickstart/quickstart-serial-linux.rst

..
    Power the Board
.. include:: ../../common/quickstart/quickstart-power-board.rst

..
    Safe Shutdown
.. include:: ../../common/quickstart/quickstart-shutdown.rst