eMMC
======

Flashing the eMMC is detailed in its dedicated chapter, referenced as :ref:`FlashEMMC-64`.

Booting from eMMC
-----------------

The phyCORE-AM64x development kit is configured to boot from an SD card slot by default. Therefore you'll have to change the DIP switches to reflect the eMMC boot mode configuration seen below.

Boot Switch Settings
~~~~~~~~~~~~~~~~~~~~

* S10 should be ON

.. image:: ../../images/phycore-am64x/pb-07225_boot-emmc.png
    :width: 350px
    :alt: eMMC Boot Switch

.. image:: ../../images/phycore-am64x/pb-07225-bootswitch-closeup.png
    :width: 500px
    :alt: phyBOARD-AM64 close-up boot switches