.. _BootingEssentials-62: Booting Essentials ================== .. sidebar:: Update your SOM's Boot Media! .. raw:: html
This section of the product wiki contains guides to update and boot from different boot sources on the phyCORE-AM62x SOM. .. toctree:: :maxdepth: 1 sdcard.rst emmc.rst ospi.rst uart-boot.rst usb-dfu.rst netboot.rst copyingFilesToTheTarget.rst configuringTheBootloader.rst Boot Modes ---------- The phyCORE-AM62x development kit supports booting from many different interfaces. By default, the developement kit is set to boot from the micro-SD card. To change the boot device, DIP switches S5 and S6 can be used. Boot switches should be changed with power off. .. list-table:: Boot Settings (S7) :header-rows: 1 * - ON - OFF * - Enables the DIP switches (S5, S6) to override default boot sequence - Disables the DIP switches (S5, S6). Allowing the SOM to boot with default boot sequence .. |image-boot-sd| image:: ../../images/phycore-am62x/pb-07124_boot-sd.png :width: 200px .. |image-boot-emmc| image:: ../../images/phycore-am62x/pb-07124_boot-emmc.png :width: 200px .. |image-boot-ospi| image:: ../../images/phycore-am62x/pb-07124_boot-ospi.png :width: 200px .. |image-boot-uart| image:: ../../images/phycore-am62x/pb-07124_boot-uart.png :width: 200px .. |image-boot-usb| image:: ../../images/phycore-am62x/pb-07124_boot-usb.png :width: 200px .. |image-boot-network| image:: ../../images/phycore-am62x/pb-07124_boot-network.png :width: 200px .. |image-boot-jtag| image:: ../../images/phycore-am62x/pb-07124_boot-jtag.png :width: 200px .. list-table:: Boot Settings :header-rows: 1 * - SD Card - eMMC - OSPI - UART - USB/DFU - Network - JTAG (No Boot) * - |image-boot-sd| - |image-boot-emmc| - |image-boot-ospi| - |image-boot-uart| - |image-boot-usb| - |image-boot-network| - |image-boot-jtag| .. image:: ../../images/phycore-am62x/pb-07124_bootswitch.png :width: 700px :alt: phyCORE-AM62x Boot .. image:: ../../images/phycore-am62x/pb-07124_bootswitch_closeup.png :width: 500px :alt: phyBOARD-AM62x close-up boot switches