eMMC
======

Flashing the eMMC is detailed in its dedicated chapter, referenced as :ref:`FlashEMMC-62a`.

Booting from eMMC
-------------------

The phyCORE-AM62Ax development kit is configured to boot from an SD Card slot by default. This guide will serve to provide basic steps for booting from the SOM's onboard eMMC flash memory after it has been flashed.


Boot Switch Settings
~~~~~~~~~~~~~~~~~~~~~~~

* S7 should be ON

.. image:: ../../images/phycore-am62x/pb-07124_boot-emmc.png
    :width: 350px
    :alt: eMMC Boot Switch

.. image:: ../../images/phycore-am62ax/pb-07524_bootswitch.png
    :width: 500px
    :alt: phyBOARD-AM62Ax boot switches


.. note::
    Be mindful of the switch orientation!