Does the phyCORE-AM57x support MIPI CSI-2?
No. Unfortunately, the PCM-057 design does not bring out the signals to the SOM connectors to support MIPI CSI-2. The TI AM571x supports 2x MIPI CSI-2 for a camera option (the TI AM572x supports 3x parallel camera / VIN). The phyCORE-AM57x SOM was designed around the AM5728 which does not have a MIPI CSI-2 interface. Therefore, support and signal availability is centered around the parallel camera interface.
The following table shows the signals available at the connector (highlighted in yellow) from the MIPI CSI-2 on the AM571x variant of the SOM:
AM571x Signal Name |
Processor Ball Number |
Net Name (Schematic) |
SOM Connector Pin |
|---|---|---|---|
csi2_0_dx0 |
AE1 |
||
csi2_0_dx1 |
AF1 |
||
csi2_0_dx2 |
AF2 |
||
csi2_0_dx3 |
AH4 |
||
csi2_0_dx4 |
AH3 |
||
csi2_0_dy0 |
AD2 |
X_VIN3A_D6 |
X1-A67 |
csi2_0_dy1 |
AE2 |
X_VIN3A_D4 |
X1-A65 |
csi2_0_dy2 |
AF3 |
||
csi2_0_dy3 |
AG4 |
X_KBD_ROW2 |
X1-A32 |
csi2_0_dy4 |
AG3 |
||
csi2_1_dx0 |
AG5 |
||
csi2_1_dx1 |
AG6 |
||
csi2_1_dx2 |
AH7 |
X_VIN3A_CLK0 |
X1-A75 |
csi2_1_dy0 |
AH5 |
||
csi2_1_dy1 |
AH6 |
||
csi2_1_dy2 |
AG7 |