Pre-Built Binaries
Note
The pre-built binaries available for download on this page reflect the default phyCORE-AM57x Development Kit configuration: KPCM-057-Lin
For a complete view of all available pre-built images please visit PHYTEC’s download server:
For an overview of all SOM/Development Kit configurations supported in this Release, checkout the Release Notes.
Download Link for the Complete, Prebuilt SD Card Image
Download the SD Card Image - phytec-qt5demo-image-phycore-am57xx-1.wic.xz
You’ll need the .wic.bmap file to flash SD Cards using the bmaptool utility.
Download the SD Card bmap - phytec-qt5demo-image-phycore-am57xx-1.wic.bmap
Note
The files below are already contained within the SD Card Image. When the SD Card image is flashed to a disk; the first partition is a boot partition containing the U-Boot Bootloader and Linux kernel binaries, and the second is the root partition containing everything else.
Download Links for Individual Pre-Built Image Components
Download the First Stage Bootloader - MLO
Download the Primary Bootloader - u-boot.img
Download the Root Filesystem - phytec-qt5demo-image-phycore-am57xx-1.tar.xz
Note
The kernel (Image), device tree blob (dtb), and device tree overlays below are included in the Root Filesystem (/boot directory of the root partition) by default.
Download the Linux Kernel Image - zImage
Download the Default Linux Device Tree - am5728-phytec-pcm-948-40300111I.dtb
For any technical questions, feel free to reach out to PHYTEC’s Support Portal!